Noxyde's 15-year highest corrosion protection rating
According to ISO-12944, the service life of NOXYDE® metal coating in C5-M environment is 15 years. Independent tests show that NOXYDE® is Rust-Oleum's unique flexible metal coating, with a service life of more than 15 years in a C5-M environment. According to ISO-12944, this is the highest possible corrosion level. This makes NOXYDE the first one-component water-based paint to provide such achievements. ISO divides the degree of corrosion in a specific environment into different levels (C1 to C5), where C1 represents mild corrosion, and C5-M (offshore) is extremely corrosive areas, such as harbors and places with a lot of salt spray. For many years, NOXYDE® has provided unprecedented corrosion protection. Due to the formation of a thick rubber-like layer, the metal can be stored for many years. Thanks to its elasticity and layer thickness, it will not be affected by the weather and will not form cracks or cracks, and the coating has excellent impact resistance and chipping resistance. For users, the biggest advantage is that it involves a water-based one-component coating. Therefore, there is no need to mix components, and the inconvenience of odor and solvent is reduced. In addition, the construction of the system is very simple: use an airless spray gun to apply two layers of Noxyde to obtain years of protection. According to the ISO 12944 test results conducted by the independent research institute CoRI, it has even exceeded 15 years. Other products on the market also comply with the C5-M classification and have a service life of more than 15 years. However, this mainly involves solvent-based (epoxy/polyurethane) two-component coatings. In other words: increased workload for users, more inconvenience caused by solvents, and reduced impact and chip resistance. Due to its unique performance and long life under extreme conditions, NOXYDE has been successfully applied to bridges (even the Golden Gate Bridge), cranes, silos, metal roofs and other metal structures. NOXYDE is also an ideal coating for metal coatings. In this case, other products often fail due to lack of adhesion, elasticity and edge coating.
Provides excellent corrosion protection
Prevent cracking and peeling
Prevent the spread of rust
Moisture will not penetrate the surface
Protect edges and rivets
Single component products are easy to handle (water-based Poly Urthane)
Primer and topcoat combined into one
16 colors available
Shock proof
Prevent the spread of rust
Anti-UV,
Anti-wear
200% of the elastic coating will not crack or peel off
Save preparation and cleaning time
Can be applied to wet surfaces
10-year warranty
Water-based formula can be diluted with water
Extreme corrosion protection under harsh conditions
Atomization drops immediately during spraying without stickiness
Can be applied by rolling, brushing, airless spraying
Two layers of protection can be guaranteed for 8-10 years
High-strength adhesion and acute angle protection
Surface treatment is optional, only high-pressure water cleaning is required
Better effect after wet sandblasting